4/10/2023 0 Comments Gx works2 indir![]() ![]() 232 (even if using USB to 232 plus SC09) select the com port in most cases it will select 115kb baud the other parameters are by default correct, press Connection test once successfully connected select online from top menu, read from PLC then tick all boxes this will upload the program. FX3 but a simple project in ladder not a structured project.Ĭlick on the connection destination & select the type i.e. Once you have the lead/leads, create a project with plc type i.e. If your FX is a clone then a lot of them have 232 port by default. ![]() There are a number of leads out there for example the SC09 cable that is 232 to 422, this would also require a USB to 232 converter if you do not have a legacy 232 port (be aware that on Win11, some of these USB to 232 converters do not work as the drivers have not been updated), if you go 232 to 422 cable route like the Mitsubishi SC09 then the USB to 232 lead needs to be the FDTI type chip.Īmazon has these plus USB to 422 leads although I have never tried them only a SC09 and a UGreen USB to 232. You need a 232 or USB to 422 converter lead, the FX series programming port is a mini din socket & 422 communication.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |